The first Service A is due at 10000 miles or 12 months, then every 20000 miles or 24 months. TIRE PRESSURE MONITORING SYSTEM SENSORS – ACTIVATE BRAKE FLUID – INSPECT – [In the event of fluid loss, determine cause and perform repair.] BRAKE SYSTEM – INSPECT – [Visually check condition of brake pads/linings, condition of brake disks.] COOLANT LEVEL – INSPECT – [Check coolant level in coolant expansion tank.] HORN OPERATION – INSPECT – [Check horn for correct function.] PARKING BRAKE – INSPECT – [Function test only: Vehicles with 4MATIC: If brake test is carried out on a dynamometer, the brake test may not exceed 10 seconds on each axle. You could otherwise damage the drive train or the brake system.] TIRES – INSPECT – [Correct tire inflation pressure, Correct inflation pressure in spare tire (where applicable). Check TIREFIT sealant expiration date (where applicable). If expired, replace it. Activate Tire Pressure Monitoring System.] TRUNK LIGHTING – INSPECT – [Check trunk/cargo compartment lighting for correct function.] VEHICLE – INSPECT – [Check vehicle's exterior for damage in visible area.] WARNING & INDICATOR LAMPS – INSPECT – [Inspect warning and function indicator lamps in the instrument cluster. Check illumination of the instrument cluster and interior lighting for correct function.] WINDSHIELD – INSPECT – [Check for damage.] ENGINE OIL – REPLACE ENGINE OIL FILTER – REPLACE SERVICE INTERVAL INDICATOR/DISPLAY – RESET – [Read out service data from instrument cluster and reset ASSYST PLUS service interval display. If the service/maintenance work has not, or has only partially been carried out after the ASSYST PLUS service interval display has been reset, the maintenance computer must be reset to its original settings.]
MILEAGE – ADDITIONAL SERVICES MAINTENANCE @50,000 MILES – All Applicable Models
MILEAGE – ALL MAINTENANCE @50,000 MILES – All Applicable Models
AIR FILTER – REPLACE SPARK PLUGS – REPLACE
James W. gave our service a 5 star review on 10/26/2022
AIR CLEANER ELEMENT – Remove & Replace – Bluetec,Bluetec 4Matic
CABIN AIR FILTER – Remove & Replace
– AC blowing at 40 degrees with a shop temperature of 82 degrees. We can evac and recharge system if desired, but system seems to be working as expected. –
Tire Rotation- Standard Car/Light Truck
INSPECTION/DIAGNOSTIC FOR CUSTOMER CONCERN(S): Check and adjust to spec
Ray S. gave our service a 5 star review on 9/16/2022
INSPECTION/DIAGNOSTIC FOR CUSTOMER CONCERN(S): Safety concerns before road trip
BATTERY – Remove & Replace – [Includes: Test.]
European/Corvette Engine Oil & Filter Service
HOOD SHOCKS OR STRUTS – Remove & Replace – Both
Tech found that the oi filler cap was faulty causing oil slinging from timing chain onto cap to run down the side of engine creating a mess. Did a light pressure wash to clean up mess.
AC system working well with exception to dirty cabin air filters. Replaced filters as needed for better air flow.
Terry D. gave our service a 5 star review on 6/30/2022
– Codes is system are all history codes and none are current at this time. C26DE {malfunction in pressure supply}, C26BB {malfunction in pressure supply} and C25D4 {no or insufficient pressure supply} – Manufacturer has not released diagnostic information for the listed codes. Tech inspected calipers, lines and tested braking performance and found no issue at this time. This may be an intermittent issue with the SBC pump assembly, but without proper diagnostic information we are left without testing procedures to confirm the diagnosis. For confirmation we would need to refer to the Mercedes dealership or we can start with bleeding the brake system to ensure there is not air in the system. –
ABS HYDRAULIC UNIT – Remove & Replace – [Includes: Bleed and test System.]
Billy S. gave our service a 5 star review on 5/9/2022