Services Performed
- INSPECTION/DIAGNOSTIC FOR CUSTOMER CONCERN(S): All lights on, shifts poorly, traction control messages (rodent damage?)
- – Pigtails needed for 1 ignition coil, 2 fuel injectors and 1 camshaft position sensor. Tech will also clean out rat debris under engine cover as needed and rebuild wiring harness with new connectors. –
- INSPECTION/DIAGNOSTIC FOR CUSTOMER CONCERN(S): Replace battery in rid-a-rat device
- – After completing wiring repairs we had code P0304 {cylinder 4 misfire} after checking the basics, vehicle has no injector command. Installed a noid light on injector connector with no operation. Cleared codes, unplugged battery, found no improvement. Injector is getting 12V but no command for ECM. Ohmed harness to ECM (good), load tested circuit (good). This is confirmation of a bad driver in the ECM from wire damage. Recommend replace ECM. –
- ELECTRONIC CONTROL MODULE – Remove & Replace – [Includes: Initialization.]
Rollie T. gave our service a 5 star review on 11/26/2024