2011 Jeep Wrangler
Mileage
89,969
Service Date
10/24/2018
Services Performed
- AIR CLEANER ELEMENT – REPLACE ENGINE OIL – REPLACE ENGINE OIL FILTER – REPLACE IGNITION CABLES/WIRES – REPLACE TRANSMISSION FLUID – REPLACE – [Replace if using the vehicle under any of these conditions: trailer towing, snow plowing, heavy loading, taxi, police, delivery service (commercial service), off-road, desert operation or more than 50% of your driving is at sustained high speeds during hot weather, above 90Deg.F (32Deg.C).] PCV VALVE – REPLACE – [This maintenance is recommended by the manufacturer to the owner, but is not required to maintain emissions warranty.] SPARK PLUGS – REPLACE AXLE FLUID – INSPECT – [Inspect the front and rear axle fluid, change if using your vehicle for police, taxi, fleet, off-road or frequent trailer towing.] BRAKE HOSES and LINES – INSPECT BRAKE LININGS – INSPECT – [Replace if necessary.] CV JOINTS – INSPECT EXHAUST SYSTEM – INSPECT SUSPENSION SYSTEM – INSPECT – [Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary.] TRANSFER CASE FLUID – INSPECT OIL LIFE SYSTEM – RESET – [To reset the oil change indicator system (after performing the scheduled maintenance) Turn the ignition switch to the "ON" position. Do not start the engine. Fully press the accelerator pedal slowly three times within ten seconds. Turn the ignition switch to the "LOCK" position. If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure.] PARKING BRAKE – ADJUST – [Adjust parking brake on vehicles equipped with four-wheel disc brakes.] TIRES – ROTATE
- FOG LAMP BULB – Remove and Replace – Both Sides
Matthew T. gave our service a 5 star review on 10/24/2018
